Skip to content

Bezel VS Prong Setting – What Difference Do They have?

djwd web

The two most common ways of securing a gem in metal are known as bezel settings and prong settings, respectively. These two settings provide a totally different method of keeping the diamond in place and may be used for a variety of jewelry items such as rings, pendants, earrings, and bracelets.

Bezel or prong? Which one should you go for? The answer is not simple but when we will go through the characters and perks as well as distances of these two settings you will have a better idea of which one to choose.

Pros and Cons Between Bezel and Prong Settings

The bezel setting and the prong setting both have their advantages and disadvantages, so let’s compare the two.

1. Bezel setting is more secure compared to the prong setting 

A bezel setting is an excellent option to go with if you want to ensure the diamond won’t move and will remain in place till the end of time, which is one of the goals you should have when selecting a setting for the rock.

 Because there is not a significant portion of the diamond that is visible, and the bezel itself will absorb the majority of the knocks in the event of little accidents, this is the safest setting for a gem that can be used.

Because of the way they are constructed, prong settings have a tendency to become less secure over time. After all, they are just very thin bands of metal, and as such, they are susceptible to being deformed.

 You might attempt to get a metal that is more durable, such as platinum, but the expense of doing so will be much more. We are not suggesting that all prong settings lose their stones; all we are saying is that the risk of losing a gem from a prong setting is greater than the risk of losing a gem from a bezel setting.

2. Lights enter more in the prong setting 

Your diamond will be able to shine brilliantly and show off its brightness when it is put in a prong setting. This is due to the fact that a diamond, like the majority of gemstones, can only dazzle when exposed to light from the outside. 

Because of this, light that enters the diamond from the bottom of the sides will also contribute to the diamond’s overall brilliance. This is the overall look that is created by a prong setting, and it is easy to see why it is the most common method used to set a diamond into a ring.

Due to the fact that about 70 percent of the diamond is covered by the bezel setting, this level of brightness cannot be achieved. In point of fact, the only components that are visible are the table and the crown (the top parts). A diamond that is placed in a bezel will thus not get as much light and will not shine as brightly as one that is not.

There are certain bezel settings that do not go all the way to the bottom of the diamond and, as a result, show a portion of the stone’s underside. The girdle, which is a significant focal point, is hidden in darkness, so they may glitter more than a setting with prongs, but never more than that.

3. Bezel setting is compatible with all gems unlike the prong setting

If you don’t know what sort of jewels you want to put in your engagement ring yet, a bezel setting can be a better alternative for you. There is a wide range of hardness levels found in gemstones, which determines how easy they may be chipped and scratched. The level of difficulty may be determined using the Mohs scale.

On this scale of hardness, a diamond has a rating of 10, which is the maximum possible score. A 7.5 on the Mohs scale, amethyst is softer and may chip. Pearls, despite their beauty, are only three on the same scale, and wearing one as an everyday ring is not a good idea at all. If not handled with sufficient care, they might get chipped, split, or even entirely broken.

A prong setting, on the other hand, will guarantee that all of the sides of your preferred gemstones that are susceptible to damage are protected. 

Does this imply that they are completely indestructible? No. However, this indicates that they have a greater probability of making it through a night out without suffering any injuries. You may improve these odds even more by selecting a cabochon cut for particularly soft stones such as lapis lazuli, jade, or coral. This will give the stone a more rounded appearance.

Because a prong setting reveals the gemstone on all of its edges, you should make sure that you have a sturdy one on hand. On the Mohs scale, any gemstone with a hardness of 8 or more should be fine under normal conditions. In spite of this, the better the score, the lower the possibilities of your jewel chipping, notwithstanding the setting.

4. Bezel Setting looks bulky and has limitations to design choices

The design choices you have available to you are limited as a result of the fact that a bezel setting does not give the impression of being as delicate or fragile as a prong setting does. A bezel setting operates in a different way than a prong setting, which means that the latter may be used in almost any design. 

It does this by wrapping the edges of the gem with more metal, which makes it broader but not in the most desirable manner. Bezel settings have the potential to give the appearance of a small tube protruding from a ring in some unfavorable circumstances. There are circumstances in which it is possible for it to have an acceptable appearance; nonetheless, you need to consider a number of different possibilities.

Therefore, if you are trying for a more dainty and delicate look for the ring, a bezel setting may not be the best choice to combine with it. However, if you decide to go with a halo around that bezel, you may be able to pull it off.

Leave a Reply

nv-author-image
Diamond Jewelry Wholesalers Dallas